Sewing method of zipper
December 30, 2019
Before installing the zipper, it is best to apply some adhesive lining on the part where the zipper is installed, especially when sewing light or unstable fabrics, use a thin adhesive with a width of about 1 inch and a length equal to the length of the zipper. The interlining will greatly help the sewing zipper effect and appearance.
1. "Overlap" sewing zipper method:
The 5 / 8-inch sewing position of the clothing car is used to edit the zipper opening with fake thread together with the sewing position, and then open the sewing position. Place the front side of the closed zipper on the opposite side of the sewing position, and place the cloth on the right side of the zipper. The edges are aligned with the edges of the garment. Use a 1 / 4-inch seam to fix the zipper cloth and the sewing position of the garment. Be careful not to catch the garment. Then flip the zipper to the front, and close the zipper along the fake stitch or as close as possible. On the other side, open the fabric so that the front of the garment is facing up, and then turn a 3 / 8-inch wide open thread from the front of the bottom of the zipper to the top, and then remove the false stitching.
2. "Hidden form" method for sewing zipper:
Hidden form is an easy and fast way to install zippers, because there is no need for fake lines and front car lines. Using the invisible zipper foot, it can turn the line as close to the zipper teeth as possible, so that it can be seen from the front. It is the invisible effect that the zipper "disappears" in the garment piece.
3. "Middle-slit" method for sewing zipper:
Car a good sewing position, open the seam position, first sew the fabric edge of the zipper on the sewing position of the garment piece, and then compile the thread on the front of the garment to the appropriate position. To be flat, do not arch the edges. Use the unilateral presser to move from the bottom to the top. Use the zipper presser to make the car line closer to the zipper teeth. The line spacing is 3/8 inches. It can be used before the car is exposed. Draw the 3 / 8-inch stitching position on the front of the garment, and remove the false stitching at the zipper opening after the car is open, so that you can open the zipper.
